下载文件详细材料
  文件名称:  United States Biological Beta Defensins (BDF) BioAssay™ ELISA Kit (Chicken) 183170
  公司名称:  上海拜力生物科技有限公司
  下载次数:   74
  文件详细阐明:
 

幸运飞艇开奖直播网 United States Biological Beta Defensins (BDF) BioAssay™ ELISA Kit (Chicken) 183170

USB# Product Name
Detection Method Detection Range Sample Matrix Sensitivity Tests / Kit List Size Images
183170 Beta Defensins (BDF) BioAssay™ ELISA Kit (Chicken)
Colorimetric As reported
Serum, plasma, cell culture supernatants, body fluid and tissue homogenate.
As reported 4896 $622 48Tests

183170 Beta Defensins (BDF) BioAssay™ ELISA Kit (Chicken)

Specifications
Kit Type
Competitive ELISA
Tests
4896
Sample Volume
100ul
Sensitivity
As reported
Detection Method
Colorimetric
Detection Range
As reported
Sample Matrix
Serum, plasma, cell culture supernatants, body fluid and tissue homogenate.
EU Commodity Code
30021091
UN DOT Shipping
UN2796 PGII
Shipping Temp
Blue Ice
Storage Temp
4°C

The BioAssay™ ELISA Kit is a 1.5 hour solid-phase Competitive ELISA designed for the quantitative determination of Beta Defensins (BDF) (Chicken). This kit for research use only, not for therapeutic or diagnostic applications.

Kit Detection Range
As reported
Kit Sensitivity
As reported
Assay Principle
Beta Defensins (BDF) BioAssay™ ELISA Kit (Chicken) utilizes the quantitative Competitive Enzyme Immunoassay technique, utilizing a monoclonal antibody and an conjugate to Beta Defensins (BDF) (Chicken). The assay sample and buffer are incubated together with the HRP conjugate in a pre-coated plate for one hour. After the incubation period, the wells are decanted and washed five times. The wells are then incubated with a substrate for HRP enzyme. The product of the enzyme-substrate reaction forms a blue colored complex. Finally, a stop solution is added to stop the reaction, which will then turn the solution yellow. The intensity of color is measured spectrophotometrically at 450nm in a microplate reader. The intensity of the color is inversely proportional to the Target Protein concentration since Protein from samples and Protein-HRP conjugate compete for the anti-Protein antibody binding site. Since the number of sites is limited, as more sites are occupied by Protein from the sample, fewer sites are left to bind the Protein-HRP conjugate. A standard curve is plotted relating the intensity of the color (O.D.) to the concentration of standards. The Target Protein concentration in each sample is interpolated from this standard curve.
Materials and Equipment Supplied
1. Microtiter Plate, 96 wells, stripwell 2. Enzyme Conjugate, 6mL, 1 vial 3. , 1 vial 4. Standard B, 50pg/mL, 1 vial 5. Standard C, 100pg/mL, 1 vial 6. Standard D, 250pg/mL, 1 vial 7. Standard E, 500pg/mL, 1 vial 8. Standard F, 1000pg/mL, 1 vial 9. Substrate A, 6mL, 1 vial 10. Substrate B, 6mL, 1 vial 11. Stop Solution, 6mL, 1 vial 12. Wash Solution (100X), 10mL, 1 vial 13. Balance Solution, 3mL, 1 vial 14. Protocol Manual  
Materials and Equipment Required, but not Supplied
1. Precision pipettors and disposable tips to deliver 10-1000uL. A multi-channel pipette is desirable for large assays. 2. 100mL and 1 Liter graduated cylinders. 3. Distilled or deionized water. 4. Tubes to prepare sample dilutions. 5. Absorbent paper. 6. Microplate reader capable of measuring absorbance at 450nm. 7. Centrifuge capable of 3000×g. 8. Microplate washer or washing bottle. 9. Incubator (37°C). 10. Data analysis and graphing software.
4.  Specimen Collection and Storage
Sample Type I: serum or plasma Sample Type II: cell culture supernatants, body fluid and tissue homogenate
Simple Protocol
Use a serum separator tube and allow samples to clot for 2 hours at room temperature or overnight at 2-8°C. Centrifuge at approximately 1000 × g (or 3000rpm) for 15 minutes. Remove serum and assay immediately or aliquot and store samples at -20°C or -80°C Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples for 15 minutes at 1000×g (or 3000rpm) at 2-8°C within 30 minutes of collection. Assay immediately or aliquot and store samples at -20°C or -80°C. The preparation of tissue homogenates will vary depending upon tissue type. For this assay, tissues were rinsed in ice-cold PBS (0.02mol/L, pH 7.0-7.2) to remove excess blood thoroughly and weighed before homogenization. Minced the tissues to small pieces and homogenized them in a certain amount of PBS with a glass homogenizer on ice. The resulting suspension was subjected to ultrasonication or to two freeze-thaw cycles to further break the cell membranes. After that, the homogenates were centrifugated for 15 minutes at 1500×g (or 5000rpm). Remove the supernate and assay immediately or aliquot and store samples at -20°C or -80°C. Cells should be lysed according to the following directions- 1. Adherent cells should be detached with trypsin and then collected by centrifugation. Suspension cells can be collected by centrifugation directly. 2. Wash cells three times in PBS. 3. Cells were resuspended in PBS and subjected to ultrasonication for 3 times. Alternatively, freeze cells at -20 °C. Thaw cells with gentle mixing. Repeat the freeze/thaw cycle for 3 times. 4. Centrifuge at 1000×g (or 3000rpm) for 15 minutes at 2-8 °C to remove cellular debris. 5. Assay immediately or store samples at -20°C or -80°C. Centrifuge cell culture media at 1000×g (or 3000rpm) for 15 minutes to remove debris. Assay immediately or store samples at -20°C or -80°C.   Please read Reagent Preparation above before starting assay procedure. It is recommended that all Standards and Samples be added in duplicate to the microtiter plate. 1. Secure the desired numbers of coated wells in the holder then add 100uL of Standards or Samples to the appropriate well in the antibody pre-coated Microtiter Plate. Add 100uL of PBS (pH 7.0-7.2) in the blank control well. 2. Dispense 10uL of Balance Solution into 100uL specimens, mix well. Note: This step is required when the sample is cell culture supernatants, body fluid and tissue homogenate; if the sample is serum or plasma, then this step should be skipped. 3. Add 50uL of Conjugate to each well (NOT blank control well). Mix well. Mixing well in this step is important. Cover and incubate the plate for 1 hour at 37°C. 4. Wash the microtiter plate using one of the specified methods indicated (manual or automatic). 5. Add 50uL Substrate A and 50uL Substrate B to each well including blank control well, subsequently. Cover and incubate for 10-15 minutes at 20-25°C. (Avoid sunlight). 6. Add 50uL of Stop Solution to each well including blank control well. Mix well. 7. Determine the Optical Density (O.D.) at 450nm using a microplate reader immediately.
Typical Certificate of Analysis
Important! Standard curve for demonstration only. Please refer to lot-specific Kit Protocol.
1. Same Lot CV%: 4.4, 5.6 2. Different Lot CV%: 6.6, 7.9 3. Spike Recovery: 94-103%
4. Linearity Range % 1:2 96-  101 1:4 93 - 107 1:8 92 - 100 1:16 96 - 108

文件下载(右键文件另存为)
幸运飞艇开奖记录 幸运飞艇历史记录 幸运飞艇-教你最新的玩法、技巧、规律、规则! 幸运飞艇玩法 幸运飞艇规则-每日更新! 幸运飞艇规则 幸运飞艇技巧-盛龙集团独家技巧传授! 幸运飞艇规律 幸运飞艇平台 幸运飞艇注册